Engineering Data Section

---

ASTM, SAE AND ISO GRADE HEAD MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS
Reprinted from the American Fastener Technologies Corporation WEB Site.

Identification Grade Mark	Specification	Fastener Description	Material	Nominal Size Range (in.)	Mechanical Properties
					Proof Load (psi)	Yield Strength Min (psi)	Tensile Strength Min (psi)
No Grade Mark	SAE J429 Grade 1	Bolts, Screws, Studs	Low or Medium Carbon Steel	1/4 thru 1-1/2	33,000	36,000	60,000
	ASTM A307 Grades A&B		Low Carbon Steel	1/4 thru 4	--	--
	SAE J429 Grade 2		Low or Medium Carbon Steel	1/4 thru 3/4 Over 3/4 to 1-1/2	55,000 33,000	57,000 36,000	74,000 60,000
No Grade Mark	SAE J429 Grade 4	Studs	Medium Carbon Cold Drawn Steel	1/4 thru 1-1/2	--	100,000	115,000
B5	ASTM A193 Grade B5		AISI 501	1/4 Thru 4	--	80,000	100,000
B6	ASTM A193 Grade B6		AISI 410			85,000	110,000
B7	ASTM A193 Grade B7		AISI 4140, 4142, OR 4105	1/4 thru 2-1/2 Over 2-1/2 thru 4 Over 4 thru 7	-- -- --	105,000 95,000 75,000	125,000 115,000 100,000
B16	ASTM A193 Grade B16		CrMoVa Alloy Steel			105,000 95,000 85,000	125,000 115,000 100,000
B8	ASTM A193 Grade B8		AISI 304	1/4 and larger	--	30,000	75,000
B8C	ASTM A193 Grade B8C		AISI 347
B8M	ASTM A193 Grade B8M		AISI 316
B8T	ASTM A193 Grade B8T	Bolts, Screws, Studs for High-Temperature Service	AISI 321	1/4 and larger	--	30,000	75,000
B8	ASTM A193 Grade B8		AISI 304 Strain Hardened	1/4 thr 3/4 Over 3/4 thru 1 Over 1 thru 1-1/4 Over 1-1/4 thru 1-1/2	-- -- -- --	100,000 80,000 65,000 50,000	125,000 115,000 105,000 100,000
B8C	ASTM A193 Grade B8C		AISI 347 Strain Hardened
B8M	ASTM A193 Grade B8M		AISI 316 Strain Hardened			95,000 80,000 65,000 50,000	110,000 100,000 95,000 90,000
B8T	ASTM A193 Grade B8T		AISI 321 Strain Hardened			100,000 80,000 65,000 50,000	125,000 115,000 105,000 100,000
L7	ASTM A320 Grade L7	Bolts, Screws, Studs for Low-Temperature Service	AISI 4140, 4142 or 4145	1/4 thru 2-1/2	--	105,000	125,000
L7A	ASTM A320 Grade L7A		AISI 4037
L7B	ASTM A320 Grade L7B		AISI 4137
L7C	ASTM A320 Grade LC7		AISI 8740
L43	ASTM A320 Grade L43		AISI 4340	1/4 thru 4	--	105,000	125,000
B8	ASTM A320 Grade B8	Bolts, Screws, Studs for Low-Temperature Service	AISI 304	1/4 and larger	--	30,000	75,000
B8C	ASTM A320 Grade B8C		AISI 347
B8T	ASTM A320 Grade B8T		AISI 321
B8F	ASTM A320 Grade B8F		AISI 303 or 303Se
B8M	ASTM A320 Grade B8M		AISI 316
B8	ASTM A320 Grade B8		AISI 304	1/4 thru 3/4 Over 3/4 thru 1 Over 1 thru 1-1/4 Over 1-1/4 thru 1-1/2	-- -- -- --	100,000 80,000 65,00 50,00	100,000 80,000 65,00 50,00
B8C	ASTM A320 Grade B8C		AISI 347
B8F	ASTM A320 Grade B8F		AISI 303 or 303Se
B8M	ASTM A320 Grade B8M		AISI 316
B8T	ASTM A320 Grade B8T		AISI 321
	SAE J429 Grade 5	Bolts, Screws, Studs	Medium Carbon Steel, Quenched and Tempered	1/4 thru 1 Over 1 to 1-1/2	85,000 74,000	92,000 81,000	120,000 105,000
	ASTM A449			1/4 thru 1 Over 1 to 1-1/2 Over 1-1/2 thru 3	85,000 74,000 55,000	92,000 81,000 58,000	120,000 105,000 90,000
	SAE J429 Grade 5.1	Sems	Low or Medium Carbon Steel, Quenched and Tempered	No. 6 thru 3/8	85,000	--	120,000
	SAE J429 Grade 5.2	Bolts, Screws, Studs	Low Carbon Martensitic Steel, Quenched and Tempered	1/4 thru 1	85,000	92,000	120,000
A325	ASTM A325 Type 1	High Strength Structural Bolts	Medium Carbon Steel, Quenched and Tempered	1/2 thru 1 1-1/8 thru 1-1/2	85,000 74,000	92,000 81,000	120,000 105,000
A325	ASTM A325 Type 2		Low Carbon Martensitic Steel, Quenched and Tempered	1/2 thru 1	85,000	92,000	120,000
A325	ASTM A325 Type 3		Atmospheric Corrosion Resisting Steel, Quenched and Tempered	1/2 thru 1 1-1/8 thru 1-1/2	85,000 74,000	92,000 81,000	120,000 105,000
BB	ASTM A354 Grade BB	Bolts, Studs	Alloy Steel, Quenched and Tempered	1/4 thru 2-1/2 2-3/4 thru 4	80,000 75,000	83,000 78,000	105,000 100,000
BC	ASTM A354 Grade BC				105,000 95,000	109,000 99,000	125,000 115,000
	SAE J429 Grade 7	Bolts, Screws,	Medium Carbon Alloy Steel, Quenched and Tempered ^4	1/4 thru 1-1/2	105,000	115,000	133,000
	SAE J429 Grade 8	Bolts, Screws, Studs	Medium Carbon Alloy Steel, Quenched and Tempered	1/4 thru 1-1/2	120,000	130,000	150,000
	ASTM A354 Grade BD		Alloy Steel, Quenched and Tempered ^4
No Grade Mark	SAE J429 Grade 8.1	Studs	Medium Carbon Alloy or SAE 1041 Modified Elevated Temperature Drawn Steel	1/4 thru 1-1/2	120,000	130,000	150,000
A490	ASTM A490	High Strength Structural Bolts	Alloy Steel, Quenched and Tempered	1/2 thru 1-1/2	120,000	130,000	150,000 min 170,000 max
No Grade Mark	ISO R898 Class 4.6	Bolts, Screws, Studs	Medium Carbon Steel, Quenched and Tempered	All Sizes thru 1-1/2	33,000	36,000	60,000
No Grade Mark	ISO R898 Class 5.8				55,000	57,000	74,000
8.8 or 88	ISO R898 Class 8.8		Alloy Steel, Quenched and Tempered		85,000	92,000	120,000
10.9 or 109	ISO R898 Class 10.9				120,000	130,000	150,000

HEX NUT IDENTIFICATION MARKING

Grade Identification Marking	Specification	Material	Nominal Size In.	Proof Load Stress ksi	Hardness Rockwell		See Note
					Min	Max
No Mark	ASTM A563 - Grade 0	Carbon Steel	1/4 thru 1-1/2	69	B55	C32	3,4
	ASTM A563 - Grade A	Carbon Steel	1/4 thru 1-1/2	90	B68	C32	3,4
	ASTM A563 - Grade B	Carbon Steel	1/4 thru 1	120	B69	C32	3,4
			over 1 thru 1-1/2	105
	ASTM A563 - Grade C	Carbon Steel May be Quenched and Tampered	1/4 thru 4	144	B78	C38	5
	ASTM A563 - Grade C3	Atmospheric Corrosion Resistant Steel May be Quenched and Tampered	1/4 thru 4	144	B78	C38	5,9
	ASTM A563 - Grade D	Carbon Steel May be Quenched and Tampered	1/4 thru 4	150	B84	C38	6
	ASTM A563 - Grade DH	Carbon Steel Quenched and Tampered	1/4 thru 4	175	C24	C38	6
	ASTM A563 - Grade DH3	Atmospheric Corrosion Resistant Steel, Quenched and Tampered	1/4 thru 4	175	C24	C38	5,9
	ASTM A194 - Grade 1	Carbon Steel	1/4 thru 4	130	B70	--	7
	ASTM A194 - Grade 2	Medium Carbon Steel	1/4 thru 4	150	159	352	7,8
	ASTM A194 - Grade 2H	Medium Carbon Steel, Quenched and Tempered	1/4 thru 4	175	C24	C38	7
	ASTM A194 - Grade 2HM	Medium Carbon Steel, Quenched and Tempered	1/4 thru 4	150	159	237	7,8
	ASTM A194 - Grade 4	Medium Carbon Alloy Steel, Quenched and Tempered	1/4 thru 4	175	C24	C38	7
	ASTM A194 - Grade 7	Medium Carbon Alloy Steel, Quenched and Tempered	1/4 thru 4	175	C24	C38	7
	ASTM A194 - Grade 7M	Medium Carbon Alloy Steel, Quenched and Tempered	1/4 thru 4	150	159	237	7
See Note 1,2	10

NOTES:

1. In addition to the indicated grade marking, all grades, except A563 grades O, A and B, must be marked for manufacturer identification.
2. The markings shown for all grades of A194 nuts are for cold formed and hot forged nuts. When nuts are machined from bar stock the nut must be additionally marked with the letter 'B'.
3. Nuts are not required to be marked unless specified by the purchaser. When marked, the identification marking shall be the grade letter O, A or B.
4. Properties shown are those of nonplated or noncoated coarse thread hex nuts.
5. Properties shown are those of coarse thread heavy hex nuts.
6. Properties shown are those of coarse thread heavy hex nuts.
7. Properties shown are those of coarse 8-pitch thread heavy hex nuts.
8. Hardnesses are Brinell Hardness Numbers.
9. The nut manufacturer, at his option, may add other markings to indicate the use of atmospheric corrosion resistant steel.
10. Specifications: ASTM A563; Carbon and Alloy Steel Nuts, ASTM A194/A194M; Carbon and Alloy Steel Nuts for Bolts for High Pressure and High Temperature Service.

---

STAINLESS STEEL SPECIFICATIONS:
Reprinted from the 1985-86 Ryerson Stock List and Data Book

CHROME-NICKEL, NON-HARDENING, AUSTENITIC (NON-MAGNETIC)

203 EZ (S20300)
Superior machining austenitic stainless designed specifically for high-speed automatic machine operations.  Faster speeds, better finish, longer tool life when compared to 303.  Same corrosion resistance.

303 (S30300)
A free machining variation of T302/304.  For use in automatic machining operations.  Corrosion resistant to atmospheric exposures, sterilizing solutions, most organic and many inorganic chemicals; most dyes, nitric acid and foods.

303 SE (S30323)
Produces better surface finish than regular T-303.  For lighter cuts - also for hot working or cold heading applications.  Same corrosion resistance as T303.

304 (S30400)
Low carbon variation of T-302.  Minimizes carbide precipitation during welding.  Like T-302, it offers excellent resistance to a wide range of corrosives and atmospheric exposures.

304 L (S30403)
Extra low carbon variation of T-304 avoids harmful carbide precipitation due to welding.  Same corrosion resistance as T-304.  Slightly lower mechanical properties than T-304.

316 (S31600)
Better corrosion and pitting resistance as well as higher strength at elevated temperatures than T-304.  Used for pumps, valves, textile and chemical equipment, pulp & paper and marine applications.

316 L (S31603)
Extra low carbon variation of T-316 to avoid carbide precipitation due to welding.  Same excellent corrosion resistance of T-31 6.

321 (S32100)
Stabilized with titanium for weldments subject to severe corrosion.  No carbide precipitation.  Excellent resistance to a variety of corrosive media Immune to most organic chemicals, dyestuffs and many inorganic chemicals.

347 (34700)
Stabilized by Cb and Ta for use in the carbide precipitation range of 800-1500"F without impairment of corrosion resistance.  Characteristics similar to T-321. 

NITRONIC ® 50 (S20910) (Formerly 22-13-5)
A nitrogen strengthened austenitic stainless that provides a combination of corrosion resistance and strength.  Corrosion resistance greater than that of T-316 and T-316L plus approximately twice the yield strength.  Very good mechanical properties at both elevated and subzero temperatures.

NITRONIC 60 (S21800)
Excellent galling resistance.  Corrosion resistance comparable to T-304 with approximately twice the yield-strength.  Metal to metal abrasive wear resistance is also good.

CHROME, HARDENABLE MARTENSITIC (MAGNETIC)

410 (S41000)
Heat-treatable stainless used widely where corrosion is not severe - air, fresh water, some chemicals and food acids.  Typical uses include valve & pump parts, fasteners, cutlery, and turbine parts, bushings.

410 HT (S41000)
Heat-treated variation of T-410 offering higher strength and hardness.  321 maximum Brinell at surface.

410 DOUBLE TEMPERED (S41000)
Quenched and double tempered variation of T-410 conforming to NACE MR-01-75 (rev. 1980) API 6A Type III.  For parts used in hydrogen sulfide (H₂S) service.

416 (S41600)
Free-machining variation of T-410 with useful corrosion resistance to natural food acids, basic salts, water and most atmospheres.

416 HT (S41600)
Heat-treated variation of T-416 with hardness Rockwell C 26/32.

440 C (S44004)
A high carbon chromium steel that can attain the highest hardness (Rockwell C60) of any standard stainless grade.  In the hardened and stress relieved condition, 440 C has maximum hardness together with high strength and corrosion resistance.  Also has good abrasion resistance.

440 F-Se (S44023)
440 C stainless steel with additions of selenium offers improved machining characteristics.

PRECIPITATION HARDENING, MARTENSITIC (MAGNETIC)

17-4 (S17400)
A precipitation-hardening grade combining high strength and hardness with corrosion resistance similar to T-304 in most media Simple low temperature heat treatment at 900/1150°F eliminates scaling and prevents excessive warpage.

17-4 DOUBLE AGED H1150 (S17400)
Solution annealed then double age hardened to procedure #1 in NACE MR 01-75.  Used in many pressure control applications in the energy market.

15-5 (S15500)
A vacuum arc remelted grade that offers high strength and hardness.  Excellent corrosion resistance plus excellent transverse toughness.

PH13-8Mo² (S13800)
A martensitic precipitation hardening stainless that provides a combination of excellent toughness and good transverse mechanical properties and excellent corrosion resistance.